Manipal University Online Entrance Test Syllabus 2013 | Eligibility | Course Duration

Welcome to Manipal University Manipal University Online Entrance Test Syllabus 2013 Section. All Candidates can find here Manipal University Online Entrance Test (OET) Physics, Chemistry, Biology, Mathematics and General English (MBBS, BDS, BTech, BPHARM, PHARMD) programmes Syllabus 2013 online.

Online Entrance Test (OET) Syllabus 2013:

MBBS, BDS, BPharm & PharmD (eligibility PCB)

The test duration is of 2.30 hours and consists of 240 multiple choice questions (MCQ) of the objective type. The approximate distribution of questions is as follows: Physics - 60 questions, Chemistry - 60 questions, Biology - 80 questions, English & General Aptitude - 40 questions.

BTech, BPharm & PharmD (eligibility PCM)

The test duration is of 2.30 hours and consists of 240 multiple choice questions (MCQ) of the objective type. The approximate distribution of questions is as follows: Physics - 60 questions, Chemistry - 60 questions, Mathematics - 80 questions, English & General Aptitude - 40 questions.

BHM, BA Culinary Arts, BAJC, BBM & BHMTT

The test duration is of 2.30 hours. There will be one question paper of multiple choice questions (MCQ) of the objective type which carries 100 marks which is divided into Numeracy (20), Conceptual (25), General English (20 ), General Awareness (20), Case Study (15).

Lateral BTech

TEST PATTERN: Duration- 1 hour. The approximate distribution of question is as follows:

Diploma level - Mathematics (50), Physics (10), Chemistry (10) and Communication Skills in English (20).

BSc graduates with Mathematics will have a separate question paper consisting of 70 questions in Mathematics and 30 questions in Communication Skills.

MD, MS, PG Medical Diploma

The test will be of 2 hours duration and there will be one question paper of 200 Multiple Choice Questions (MCQ) of the objective type which carries 200 marks. The approximate distribution of questions is given below.

Medicine including Paediatrics, Genetics, Dermatology & Venereology etc. (40), Surgery including Orthopaedics, Trauma and Anaesthesiology (30), Obstetrics & Gynaecology (20), Community Medicine (20), Physiology (14), Pharmacology (14), Pathology (14), Anatomy (10), Otorhinolaryngology (10), Ophthalmology (10), Biochemistry (6), Microbiology (6), Forensic Medicine (6).

MDS & PG Diploma in Dental Materials

The test duration is 2 hours .There will be one question paper of 200 Multiple Choice Questions (MCQ) of the objective type which carries 200 marks. The approximate distribution of questions is given below. Pedodontics (16), Orthodontics (16), Periodontics (16), Oral Medicine & Radiology (16), Prosthodontics (16), Conservative Dentistry (16), Oral Surgery (16), Public Health (16), Human Anatomy (8), Human Physiology including Biochemistry (8), Dental Materials (8), Pharmacology (8), General Pathology & Microbiology (8), Oral Anatomy (8), General Medicine (8), General Surgery (8), Oral Pathology (8).

MPT/MPT (Dual degree)

The test duration is 2 hours and consists of 200 Multiple Choice Questions (MCQ) of the objective type. The approximate distribution of questions is given below: Physiotherapy in Community Health (10), Electrodiagnosis (05), Ergonomics and Biomechanics (25), Exercise Physiology (05), Kinesiotherapeutics (25), Physiotherapy in Neurology (30), Physiotherapy in Cardio pulmonary (30), Physiotherapy in Orthopaedics (30), Electrotherapy (20), Anatomy (10), Physiology (10).

MASLP

The test duration is 2 hours and consists of 2 sections, section I includes 150 Multiple Choice Questions related to Speech and Hearing and section II includes 50 multiple choice questions related to Allied Health subjects. The approximate distribution of questions is given below:

SECTION I: Fluency (15), Articulation (15), Voice (15), Childhood Communication Disorder (15), Neurogenic Language disorders (15), Neurogenic Speech disorders (15), Diagnostic Audiology (15), Paediatric Audiology (10), Rehabilitative Audiology (07), Educational Audiology (08), Hearing Aids (15), Noise (05).

SECTION II: Anatomy (10), Physiology (05), Psychology (05), Electronics (05), Acoustics (05), Statistics & Research methodology (05), ENT (05), Linguistics & Phonetics (10).

MPharm / PharmD Post Baccalaureate

The test duration is 2 hours and consists of 200 Multiple Choice Questions (MCQ) of the objective type. The approximate distribution of questions is as follows: Pharmaceutical Analysis (25), Pharmaceutical Chemistry (25), Pharmacology (25), Pharmacy Practice (25), Pharmacognosy (25), Pharmaceutics (25), Pharmaceutical Marketing, Management & Jurisprudence (25), Biochemistry, Pathology, Physiology, Microbiology and Biotechnology (25).

MSc Nursing

The test duration is 2 hours and consists of 200 Multiple Choice Questions of objective type, covering the subjects of BSc Nursing.

MCA

The test duration is 1.30 hours and consists of 100 Multiple Choice Questions (MCQ) of the objective type. The subjects & approximate distribution of questions is as follows: Mental Ability (25), Basic Mathematics (10), General English (25) and Computer Aptitude (40).

MA Communication/PG DCC/MFAF (Dual Degree)

The test duration is of 2 hours and consists of 120 multiple choice questions (MCQ) of the objective type. The test includes questions on reading comprehension, verbal ability (spotting errors, sentence improvement, vocabulary etc.), quantitative & numerical ability (arithmetic, algebra, geometry, data interpretation etc.) and reasoning & general intelligence (analytical reasoning, logical reasoning, general intelligence etc.). There could also be a few questions on the latest trends and developments in the media, social and economic areas.

MSc Medical (Anatomy, Physiology, Biochemistry, Microbiology, Pharmacology & Clinical Embroylogy)

The test duration is of 2 hours and consists of 3 sections. The approximate distribution of questions is as follows: Section 1 - Zoology (100), Section 2 - Botany (100), Section 3 - Chemistry (100). Candidates should answer any 2 of the above 3 sections. The question paper is of multiple choice questions (MCQ) of the objective type, covering the syllabus of BSc level followed by major Indian Universities.

MSc (Medical Biotechnology, Molecular Biology and Human Genetics, Clinical Virology & Regenerative Medicine)

The test duration is of 2 hours and consists of 200 multiple choice questions (MCQ) of the objective type, covering the syllabus of BSc level followed by major Indian Universities. The approximate distribution of questions is as follows: Physics (40), Chemistry (40), Botany (40), Zoology (40) and Biochemistry (40).

MTech - (Advanced Thermal Power & Energy Systems,Astronomy & Space Engineering, Biochemical Engineering, Biomedical Engineering, Computer Aided Mechanical Design & Analysis, Chemical Engineering, Computer Science & Engineering, Computer Science and Information Security, Construction Engineering, Control Systems, Digital Electronics & Advanced Communication, Energy Management Auditing and Lighting, Engineering Management, Environmental Engineering, Industrial Biotechnology, Industrial Pollution & Control, Manufacturing Engineering and Technology, Microelectronics, Network Engineering, Power Electronic Systems and Control, Printing and Media Engineering, Software Engineering, Structural Engineering, Dual(Network Engineering, Printing and Media Technology, Software Engineering)

-

TEST PATTERN: Duration - 1.30 hours. There will be one question paper of 60 multiple choice questions (MCQ) of the objective type. Each question carries four marks, each correct answer will be awarded four marks. One mark will be deducted from the score for each wrong answer. Each paper shall have 50 Questions from the respective disciplines and 10 questions from Engineering Mathematics.

Based on the qualifying degree, candidate is expected to select any ONE of the NINE disciplines listed below in the online test booking system. Request for change of discipline after selection in online test booking system will not be considered. The choice of the paper is the responsibility of the candidate.

1. BIOTECHNOLOGY ( BT) : Process Calculations and Thermodynamics, Fluid Mechanics and Mechanical Operations,

Heat Transfer, Mass Transfer, Chemical Reaction Engineering, Instrumentation and Process Control, Bioprocess

Engineering and Downstream Processing, Molecular Biology and Genetic Engineering, Biochemistry and

Bioinformatics, Fermentation Engineering and Enzyme Technology, Microbiology and Immunotechnology.

ENGINEERING MATHEMATICS: Linear Algebra, Differential Equations, Probability and Statistics, Numerical Methods,

Transform Theory.

2.CHEMICAL ENGINEERING (CH): Process Calculations and Thermodynamics, Fluid Mechanics and Mechanical Operations, Heat Transfer, Mass Transfer, Chemical Reaction Engineering, Instrumentation and Process Control, Plant Design and Economis, Chemical Technology, Material of Construction and Corrosion, Energy Engineering Pollution Control and Safety.

ENGINEERING MATHEMATICS: Linear Algebra, Differential Equations, Probability and Statistics, Numerical Methods,

Transform Theory.

3.CIVIL ENGINEERING (CE): Engineering Mechanics, Strength of Materials, Design of Steel and Concrete

Structures, Structural Analysis, Geotechnical Engineering, Foundation Engineering, Surveying, Transportation

Engineering, Construction Planning – Organization and Management, Environmental Engineering, Fluid Mechanics, Water Resources Engineering, Concrete Technology, Engineering Materials, Estimations and Specification.

ENGINEERING MATHEMATICS: Linear Algebra, Calculus, Differential Equations, Probability and Statistics, Numerical Methods.

4.COMPUTER SCIENCE AND INFORMATION TECHNOLOGY (CS): Programming Languages, Data Structure, Logic Design and Circuits, Computer Architecture, Operating Systems, Database Systems, Computer Networks, Design and Analysis of Algorithm, Software Engineering, Object Oriented Analysis and Design.

ENGINEERING MATHEMATICS: Probability and Statistics, Numerical Methods, Combinatorics, Graph Theory, Mathematics and Predicate Logic.

5.ELECTRICAL ENGINEERING (EE): Electric Circuits Analysis, Measurements & Instrumentation, Linear and Digital Control Systems, Signals, System and Signal Processing, Analog Devices and Circuits, Digital Design and Computer Architecture, Micro Processors and Micro Controllers (8 – bit family), Electrical Machinery & Drives, Power Electronics, Power & Energy Systems, Utilization of Electrical Power.

ENGINEERING MATHEMATICS: Linear Algebra, Differential Equations, Probability and Statistics, Numerical Methods, Transform Theory.

6.ELECTONICS & COMMUNICATION ENGINEERING (EC): Electric Circuits Analysis, Analog Devices and Circuits, Digital Design & VHDL, Electro Magnetic Waves, Analog Communication, Digital Communication, Antennas and Propagation, Micro Processors and Micro Controllers (16 – bit family), Signal Processing, Linear and Digital Control System.

ENGINEERING MATHEMATICS: Linear Algebra, Complex Variables, Probability and Statistics, Numerical Methods, Transform Theory.

7.INSTRUMENTATION AND CONTROL ENGINEERING (IC): Electric Circuits Analysis, Electrical & Electronics Measurements, Transducers & Instrumentation, Linear and Digital Control System, Signals, Systems and Signal Processing, Analog Devices and Circuits, Digital System Design, Micro Processors and Micro Controllers (8 – bit family), Modern Control Theory and Process control, Analytical, Optical and Biomedical Instrumentation.

ENGINEERING MATHEMATICS: Linear Algebra, Differential Equations, Probability and Statistics, Numerical Methods, Transform Theory.

8.MECHANICAL ENGINEERING (ME): Engineering Mechanics, Strength of Materials, Design of Machine Elements, Basics of Manufacturing Science, Measurement & Metrology, Theory of Machines, Mechanical Vibrations, Thermodynamics & Heat Transfer, Material Science & Metallurgy.

ENGINEERING MATHEMATICS: Linear Algebra, Calculus, Differential Equations, Probability and Statistics, Numerical Methods.

9.PRINTING AND MEDIA ENGINEERING (PE) : Pre-Press Process, Digital Pre – Press, Electronic Composition and Software used, Color Management Concepts and Workflow, types of Printing Inks and Substrates, Properties and Testing, Conventional and Digital Printing, Principle, Types and Applications, Print Finishing, Packaging, Types, Materials and Design, Total Quality Management, Safety and Environment Management in Printing Industry.

ENGINEERING MATHEMATICS: Linear Algebra, Calculus, Differential Equations, Probability and Statistics, Numerical Methods.

MSc Tech Lateral entry ( Medical Software, VLSI Design, Embedded Systems, VLSI System Design & Verification, Embedded & Wireless Technology,High Performance Computing,Computing Technologies & Vertualization).

MSc Tech Dual Degree Lateral entry (Embedded Systems & Instrumentation Control (ESIGELEC), Buisness Management Systems and Buisness Information Systems (ESIGELEC, France), Dual Degree LU, UK, Dual Degree ENU, UK,GroepT, Leuven, Belgium).

TEST PATTERN: ( For BE/BTech/MCA/MSc Graduates Only)

Duration - 1.30 hours. There will be one question paper of 60 multiple choice questions (MCQ) of the objective type. Each question carries four marks, each correct answer will be awarded four marks. One mark will be deducted from the score for each wrong answer. Each paper shall have 50 Questions from the respective disciplines and 10 questions from Engineering Mathematics.

Candidate applying for MSc Tech Lateral Entry Programmes have to give an Entrance Test in any ONE of the following disciplines. Based on the qualifying degree, candidate is expected to select any one of the following discipline in the online test booking system. Request for change of discipline after selection in online test booking system will not be considered. The choice of the paper is the responsibility of the candidate.

1.COMPUTER SCIENCE AND INFORMATION TECHNOLOGY (CS): Programming Languages, Data Structure, Logic Design and Circuits, Computer Architecture, Operating Systems, Database Systems, Computer Networks, Design and Analysis of Algorithm, Software Engineering, Object Oriented Analysis and Design.

ENGINEERING MATHEMATICS: Probability and Statistics, Numerical Methods, Combinatorics, Graph Theory,

Mathematics and Predicate Logic.

2.ELECTRICAL ENGINEERING (EE): Electric Circuits Analysis, Measurements & Instrumentation, Linear and Digital

Control Systems, Signals, System and Signal Processing, Analog Devices and Circuits, Digital Design and Computer

Architecture, Micro Processors and Micro Controllers (8 – bit family), Electrical Machinery & Drives, Power Electronics, Power & Energy Systems, Utilization of Electrical Power.

ENGINEERING MATHEMATICS: Linear Algebra, Differential Equations, Probability and Statistics, Numerical Methods,

Transform Theory.

3. ELECTONICS & COMMUNICATION ENGINEERING (EC): Electric Circuit Analysis, Analog Devices and Circuits,

Digital Design & VHDL, Electro Magnetic Waves, Analog Communication, Digital Communication, Antennas and

Propagation, Micro Processor and Micro Controllers (16 – bit family), Signal Processing, Linear and Digital Control

System.

ENGINEERING MATHEMATICS: Linear Algebra, Complex Variables, Probability and Statistics, Numerical Methods,

Transform Theory.

4. INSTRUMENTATION AND CONTROL ENGINEERING (IC): Electric Circuits Analysis, Electrical & Electronics

Measurements, Transducers & Instrumentation, Linear and Digital Control System, Signals, Systems and Signal Processing, Analog Devices and Circuits, Digital System Design, Micro Processors and Micro Controllers (8 – bit family), Modern Control Theory and Process control, Analytical, Optical and Biomedical Instrumentation.

ENGINEERING MATHEMATICS: Linear Algebra, Differential Equations, Probability and Statistics, Numerical Methods,

Transform Theory.

Post new comment
 
Question Papers
Assignments
Scholarships
Colleges in India